2021 Rocky Mountain Slayer Alloy 50

C$5,749.00
The ultimate big mountain platform, the Slayer is meant for riding fast and sending it deep. -Available for Pre Orders-

* To check in store availability: 

Available in store

Close
Select variant below then view stock  here

Out of stock

The ultimate big mountain platform, the Slayer is meant for riding fast and sending it deep. Designed to be able to pedal to the top of any mega descent, this bike allows you to shred corners, send gaps, and ride harder than you ever imagined.

Whether you're smashing through the roughest trails imaginable or scrubbing lips in the park, the Slayer is built for those who charge. We’ve made it longer and slacker, with better small-bump sensitivity and a more progressive end-stroke. For those who like to fine-tune their ride before they shred, we kept the RIDE-4 adjustment system to allow for further geometry and ride feel customization. Rocky Mountain led the original freeride movement, and the Slayer continues the legacy.

SPECS

  • Frame - FORM™ Alloy. Full Sealed Cartridge Bearings. Press Fit BB92. Internal Cable Routing. 2-Bolt ISCG05 Tabs. RIDE-4™ Adjustable Geometry + Suspension Rate. 29: 170mm Travel / 27.5: 180mm Travel. FORM™ Alloy Rear Triangle
  • Sizes - 27.5 = SM - MD | 29 = MD - LG - XL
  • Fork - Fox 38 Float EVOL GRIP Performance Series | 27.5 = 180mm, 37mm Offset | 29 = 180mm, 44mm Offset
  • Front Travel - 180mm
  • Shock - Fox DHX2 Performance | Steel Spring | Sealed Bearing Eyelet | 25x8mm F Hardware | All
  • Sizes = 230x65mm | Size-Specific tune in FAQ
  • Rear Travel - l27.5 - 180mm | 29 - 170mm
  • Headset - FSA Orbit NO.57E | 36°x45° Bearings | 30.2mm x 41mm x 7.1mm Upper | 40mm x 51.8mm x 7.5mm Lower | 1.5" Crown Race
  • Stem - Rocky Mountain 35 AM | 5° Rise | All Sizes = 40m
  • Handlebar - Rocky Mountain AM | 780mm Width | 27.5 = 38mm Rise | 29 = 25mm Rise | 9° Backsweep | 5° Upsweep | 35mm Clamp
  • Grips - Ergon GD10 EVO Lock On
  • Brakes - Shimano SLX Trail 4 Piston | Metal Pads | RT66 203mm F Rotor | RT66 203mm R Rotor
  • Shifters - Shimano SLX
  • Rear Derailleur - Shimano XT
  • Cranks & Chainrings - Race Face Aeffect Cinch | 27.5 = 34T | 29 = 32T | 24mm Spindle | 170mm Crank Length
  • Bottom Bracket - Shimano SM-BBMT500
  • Cassette - Shimano SLX 10-51T
  • Chain - Shimano M7100
  • Front Hub - Rocky Mountain Sealed Boost 15mm
  • Rear Hub - DT Swiss 370 Boost 148mm | RMB Axle | 163mm x 12mm x 1.5mm
  • Spokes - DT Swiss Champion 2.0
  • Rims - WTB ST i30 TCS 2.0 Tubeless | Tubeless Ready - Tape | Valves Incl | 32H
  • Tires - F: Maxxis Minion DHF 2.5 WT 3C MaxxGrip DD Tubeless Ready // R: Maxxis Minion DHR II 2.4 WT 3C MaxxGrip DD Tubeless Ready
  • Seatpost - Race Face Aeffect R Dropper 30.9mm | Shimano MT500 Remote | SM = 125mm | MD = 150mm | LG - XL = 175mm
  • Saddle - WTB Volt Race | Cromoly Rails | 142mm Width
  • Weight - 17.15 KG | 37.7 LBS | Incl. Inner Tubes

GEOMETRY

SLAYER ALLOY 50 (27.5)

  S M
TTH 574 598
HTA 63.9 63.9
HTL 90 95
STA 75.4 75.4
STL 380 420
RC 431 431
BBD 18 18
R 419 444
S 595 600
*SH 806 806
WB 1,180 1,205

SLAYER ALLOY 50 (29)

  M L XL
TTH 604 629 664
HTA 63.2 63.2 63.2
HTL 95 110 125
STA 75.2 75.2 75.2
STL 420 445 480
RC 443 443 443
BBD 27 27 27
R 439 462 493
S 625 639 653
*SH 832 832 832
WB 1,233 1,262 1,299
Model Geometry Chart
  • TTH: Top Tube Length - HORZ
  • HTA: Head Tube Angle
  • HTL: Head Tube length
  • STA: Seat Tube Angle - Effective
  • STL: Seat Tube length
  • RC: Rear Centre
  • BBD: Bottom bracket drop
  • R: Reach
  • S: Stack
  • *SH: Standover Height
  • WB: Wheelbase

*We measure Standover Height 200mm forward from the centre of the bottom bracket. It's measured this way to provide you with the best possible information when looking at frame geometry.