2021 Specialized S-Works Stumpjumper EVO

C$14,999.00
Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper.

* To check in store availability: 

Available in store

Close
Select variant below then view stock  here

The S-Works Stumpjumper EVO is much more than just a trail bike, it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy.

In true S-Works fashion, the S-Works Stumpjumper EVO is built to the hilt. A Fox Factory fork and rear shock handle suspension duties, while SRAM Code RSC four-piston brakes scrub speed, and a full SRAM AXS wireless groupset completes this lust-worthy build.

  • All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
  • The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
  • Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
  • We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.

SPECS

  • FRAME - FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
  • SEAT BINDER - Alloy, 38.6
  • SWAT - Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder
  • REAR SHOCK - FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima coat, 3-position adjustment w/ Open Mode adjustment, S1:210x50mm, S2-S6:210x55mm
  • FORK - FOX FLOAT 36 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
  • STEM - Deity Copperhead, 35.0mm
  • HANDLEBARS - Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
  • GRIPS - Deity, Knuckleduster, Black
  • SADDLE - Bridge, 155/143mm, Hollow Ti-rails
  • SEATPOST - RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)
  • FRONT BRAKE - SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm
  • REAR BRAKE - SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm
  • REAR DERAILLEUR - SRAM XX1 Eagle AXS
  • SHIFT LEVERS - SRAM XX1 Eagle AXS
  • CHAIN - SRAM XX1, 12 speed
  • CRANKSET - SRAM X01 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
  • CHAINRINGS - Steel, 30T
  • RIMS - Roval Traverse SL 29, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h
  • FRONT HUB - Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing
  • REAR HUB - Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing
  • SPOKES - DT Competition Race
  • FRONT TIRE - Butcher, GRID TRAIL casing, GRIPTON® compound, 29x2.3"
  • REAR TIRE - Eliminator, GRID TRAIL casing, GRIPTON® compound, 29x2.3"
  • INNER TUBES - Standard, Presta valve

* Specifications are subject to change without notice

 

GEOMETRY

 

S1

S2

S3

S4

S5

S6

CRANK LENGTH

165mm

170mm

170mm

170mm

170mm

175mm

STEM LENGTH

35mm

35mm

50mm

50mm

50mm

50mm

SEATPOST LENGTH

100 mm

125 mm

150 mm

170 mm

170 mm

170 mm

SADDLE WIDTH

155mm

155mm

143mm

143mm

143mm

143mm

HANDLEBAR WIDTH

800mm

800mm

800mm

800mm

800mm

800mm

REACH

408mm

428mm

448mm

475mm

498mm

528mm

STACK

613mm

617mm

626mm

635mm

644mm

654mm

WHEELBASE

1167mm

1191mm

1216mm

1247mm

1285mm

1319mm

CHAINSTAY LENGTH

438mm

438mm

438mm

438mm

448mm

448mm

FRONT CENTER

732mm

756mm

780mm

809mm

838mm

873mm

BB DROP

40mm

35mm

35mm

35mm

35mm

35mm

BB HEIGHT

335mm

340mm

340mm

340mm

340mm

340mm

SEAT TUBE ANGLE

78°

77.6°

77.2°

76.9°

77°

77°

SEAT TUBE LENGTH

385mm

385mm

405mm

425mm

445mm

465mm

STANDOVER HEIGHT

733mm

764mm

763mm

762mm

767mm

770mm

FORK RAKE/OFFSET

44mm

44mm

44mm

44mm

44mm

44mm

TRAIL

131mm

131mm

131mm

131mm

131mm

131mm

FORK LENGTH (FULL)

561mm

571mm

571mm

571mm

571mm

571mm