2022 Norco Shore Park

C$6,099.00
Article code 0613111745
The ultimate co-pilot on your gravity-fueled days at the park.

* To check in store availability: 

Available in store

Close
Select variant below then view stock  here

The Shore Park evolved on the toughest trails on Earth using Norco’s Ride Aligned™ Design System and the latest in suspension and ride engineering, emerging as the ultimate co-pilot on your gravity-fueled days at the park.

Bring the spirit of the North Shore to every Bike Park lap and shuttle run.

The elevated Horst Link suspension design and integrated idler pulley provides grip and support on the world’s most challenging bike park lines with minimal pedal kickback when the landing’s a little harsher than you expected.

REASONS IT'S RAD

  • Long Travel, No Kickback.
  • Built to rock and keeps on rollin’.
  • Models built for Freeride trails and Bike Park sessions.
  • Get up to speed fast.
  • Features the Ride Aligned™ Design System.

SPECS

Frameset
  • FRAME - Aluminum Park, 190mm Travel, Ride Aligned™
  • FORK - RockShox BoXXer Select RC, Charger, 200mm Travel, 46mm Offset
  • REAR SHOCK - RockShox Super Deluxe Coil Ultimate DH, Custom Tune 225x75mm, 400lb/in (S), 450lb/in (M), 500lb/in (L), 550lb/in (XL)
Drivetrain
  • REAR SHIFTER - SRAM GX 1
  • REAR DERAILLEUR - SRAM GX DH Mid Cage
  • CRANKSET - Race Face Chester, 36T, 165mm
  • BOTTOM BRACKET - Race Face Sealed Bearing, BSA Threaded
  • CASSETTE - SRAM CS PG720 DH, 11-25T, 7 Speed
  • CHAIN - SRAM PC 1110
  • CHAIN - GUIDE - Norco Idler Chain Guide and Lower Guard
Brakes
  • FRONT BRAKE - SRAM Code R, 4 Piston, Metallic Pads
  • FRONT BRAKE ROTOR - SRAM Centerline, 200mm
  • REAR BRAKE - SRAM Code R, 4 Piston, Metallic Pads
  • REAR BRAKE ROTOR - SRAM Centerline, 200mm
  • BRAKE LEVERS - SRAM Code R
Components
  • HANDLEBAR - Norco 6061, 800mm, 25mm Rise
  • STEM - Race Face Chester DM, 50mm Length, 35mm Clamp
  • SEATPOST - Alloy Double Bolt, 34.9mm
  • HEADSET - FSA #57E Sealed Bearing
  • SADDLE - WTB Volt 250 Sport
  • GRIPS - DMR DeathGrip A20, Thin (S, M), Thick (L, XL)
Wheels
  • FRONT HUB - Sealed Bearing, 20x110mm Boost, 6 Bolt
  • REAR HUB - SRAM MTH-746 Sealed Bearing, 12x148mm Boost, HG, 6 bolt
  • RIMS - e*thirteen LG1 DH 27.5
  • FRONT TIRE - Maxxis Assegai 2.5", 3C Maxx Grip/DD/TR
  • REAR TIRE - Maxxis Assegai 2.5", 3C Maxx Grip/DD/TR
  • SPOKES/NIPPLES - Stainless Black
  • VALVES - e*thirteen Tubeless
  • SEALANT - Stan's - 200ml

Geometry

  S M L XL
Wheel Size 27.5" 27.5" 27.5" 27.5"
Travel (mm front/mm rear)
200/190
Reach 420 450 480 510
Stack 599 612 626 639
Head Tube Angle
63.0
Fork Offset
46
Seat Tube Length 365 395 410 455
Effective Seat Tube Angle 77.0 77.3 77.7 78.0
Rear Centre Length 435 440 445 450
Bottom Bracket Drop
10
Bottom Bracket Height
347
Horizontal Top Tube 558 588 617 646
Wheelbase 1206 1248 1290 1332
Standover 684 681 683 674
Head Tube Length 100 115 130 145
Trail
130
Maximum Post Insertion 255 250
270
Stem Length
50
Crank Length
165
Tire Size
2.35" - 2.6"