2022 Specialized S-Works Enduro

C$15,499.00
This is the bike that defines the very genre that bears its name—the S-Works Enduro climbs with utmost efficiency yet stays calm on even the gnarliest descents.

* To check in store availability: 

Available in store

Close
Select variant below then view stock  here

This is the bike that defines the very genre that bears its name—the S-Works Enduro climbs with utmost efficiency yet stays calm on even the gnarliest descents. It features a bomber, yet lightweight carbon frame that blissfully tackles the kind of terrain that chews up and spits out lesser bikes.

 

SPECS

FRAMESET

  • Frame - FACT 11m carbon chassis and rear-end, S-Sizing Enduro Race Geometry, SWAT™ Door integration, threaded BB, internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 170mm of travel
  • Seat Binder - Alloy, 38.6mm

COCKPIT

  • Stem - Deity, 35.0mm
  • Handlebars - Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
  • Grips - Deity, Knuckleduster, Black
  • Saddle - Bridge, 155/143mm, Hollow Ti-rails
  • SeatPost - RockShox Reverb AXS, 30.9, 1X remote, (S2/S3: 150mm, S4/S5:170mm)

BRAKES

  • Front Brake - SRAM Code RSC, 4-piston caliper, hydraulic disc, 220mm
  • Rear Brake - SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm

DRIVETRAIN

  • Rear Derailleur - SRAM XX1 Eagle AXS
  • Shift Levers - SRAM Eagle AXS Rocker Paddle
  • Cassette - Sram XG-1299, 12-Speed, 10-52t
  • Chain - SRAM XX1 Eagle
  • Crankset - SRAM X01 Eagle, DUB, 170mm
  • Chainrings - 30T
  • Bottom Bracket - SRAM DUB, BSA 73mm, threaded

WHEELS

  • Rims - Roval Traverse SL 29, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h
  • Front Hub - Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing
  • Rear Hub - Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing
  • Spokes - DT Competition Race
  • Front Tire - Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"
  • Rear Tire - Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3"
  • Inner Tubes - Standard, Presta valve

SUSPENSION

  • Rear Shock - FOX FLOAT X2 Factory, Rx Trail Tune, 2-position adjustment, high and low speed rebound and compression adjust, Trunnion mount, 205x60mm
  • Fork - FOX FLOAT 38 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 170mm of travel

* Specifications are subject to change without notice

 

Geometry

  S2 S3 S4 S5
Crank Length 170mm 170mm 170mm 170mm
Stem Length 35mm 50mm 50mm 50mm
Seatpost Length 150mm 150mm 170mm 170mm
Saddle Width 155mm 143mm 143mm 143mm
Handlebar Width 800mm 800mm 800mm 800mm
Wheelbase 1217mm 1246mm 1274mm 1302mm
Head-Tube Length 95mm 100mm 110mm 120mm
B-B Drop (Low BB) 28mm 28mm 28mm 28mm
Top Tube Length  591mm 619mm 644mm 670mm
Fork Rake/Offset 46mm 46mm 46mm 46mm
Head-Tube Angle 64.3mm 64.3mm 64.3mm 64.3mm
B-B Height 354mm 354mm 354mm 354mm
Chain-Stay Length 442mm 442mm 442mm 442mm
Trail (Low BB) 132mm 132mm 132mm 132mm
Fork Length (Full) 581mm 581mm 581mm 581mm
Seat-Tube Angle 76° 76° 76° 76°
Stack (Low BB) 616mm 620mm 629mm 638mm
Reach (Low BB) 437mm 464mm 487mm 511mm
Front-Center (Low BB) 777mm 806mm 833mm 862mm
B-B Height (Low BB) 347mm 347mm 347mm 347mm
B-B Drop 21mm 21mm 21mm 21mm
Seat-Tube Length 400mm 420mm 440mm 465mm
Head-Tube Angle (Low BB) 63.9° 63.9° 63.9° 63.9°